收藏本站
PE3511
Product Specification
Evaluation Kit
Evaluation Kit Operation
The SC-70 Prescaler Evaluation Board was
designed to help customers evaluate the PE3511
divide-by-2 prescaler. On this board, the device
input (pin 3) is connected to connector J1 through a
50 ? transmission line. A series capacitor (C1)
provides the necessary DC block for the device
input. A value of 100 pF was used for this board
layout; other applications may require a different
value.
The device output (pin 6) is connected to J3 through
a 50 ? transmission line. A series capacitor (C5)
provides the necessary DC block for the device
output. This capacitor value must be chosen to have
a low impedance at the desired output frequency of
the device. A value of 100 pF was chosen for the
evaluation board. At both input and output, select a
capacitor value that offers low series reactance while
ensuring that any parasitic resonances are well
above the operating bandwidth.
The board is constructed of a two-layer FR4 material
with a total thickness of 0.031”. The bottom layer
provides ground for the RF transmission lines. The
transmission lines were designed using a coplanar
waveguide above ground plane model with trace
width of 0.030”, trace gaps of 0.007”, dielectric
thickness of 0.028”, metal thickness of 0.0014”, and
ε r of 4.4. Note that the predominate mode of these
transmission lines is coplanar waveguide. Liberal
numbers of plated through holes unite the top and
?2003-2008 Peregrine Semiconductor Corp. All rights reserved.
bottom ground areas for best performance.
J6 provides DC power to the device via pin 4. Two
decoupling capacitors (100 pF, 1000 pF) are
included on this trace. It is the customer’s
responsibility to determine proper supply decoupling
for their design application.
Applications Support
If you have a problem with your evaluation kit or if
you have applications questions call (858) 731-9400
and ask for applications support. You may also con-
tact us by fax or e-mail:
Fax: (858) 731-9499
E-Mail: help@psemi.com
Figure 9. Evaluation Board Layouts
Peregrine Specification 101/0110
Figure 10. Evaluation Board Schematic
Peregrine Specification 102/0189
Document No. 70-0106-06 │ UltraCMOS? RFIC Solutions
Page 6 of 9
Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
3512-00 EVAL KIT FOR 3512
3513-00 EVAK KIT FOR 3513
35PSB LAMP INCAND T-2 TELE SLIDE 35V
36003200 BOARD SHIELD 20X20MM COVER
36003250 BOARD SHIELD 25X25MM COVER
36003300 BOARD SHIELD 30X30MM COVER
36003500 BOARD SHIELD 50X50MM COVER
36003600 BOARD SHIELD 60X60MM COVER
相关代理商/技术参数
35110-0 制造商:TE Connectivity 功能描述:TERMINAL,PIDG R 12-10 1/4 - Bulk
351-1000 功能描述:LED 安装硬件 LED BEZEL BLK T13/4 RoHS:否 制造商:Bivar 产品:LED Mounting Clips LED 大小:5 mm 材料:Nylon 颜色:Black 主体长度:4.4 mm 面板厚度尺寸: 封装:Bulk
351100000 制造商:C&K Components 功能描述:THUMBWHEEL,5 SWITCH,SP 10POS,SNAP IN,NO SEAL,BLK,HZMT - Bulk 制造商:C&K Components 功能描述:Switch Thumb-Pushwheel Thumbwheel Decimal 10 0.1A 120VAC 28VDC PC Board Panel Mount
351100001 制造商:ITT 制造商全称:ITT Industries 功能描述:Thumbwheel Switches
351100002 制造商:ITT 制造商全称:ITT Industries 功能描述:Thumbwheel Switches
351100003 制造商:ITT 制造商全称:ITT Industries 功能描述:Thumbwheel Switches
351-1001 功能描述:LED 安装硬件 LED BEZEL CHRM T13/4 RoHS:否 制造商:Bivar 产品:LED Mounting Clips LED 大小:5 mm 材料:Nylon 颜色:Black 主体长度:4.4 mm 面板厚度尺寸: 封装:Bulk
351100100 制造商:ITT 制造商全称:ITT Industries 功能描述:Thumbwheel Switches